shenzhen baichuan electronics
Measuring range:
1) Battery voltage measurement range: 0-20V Minimum resolution 10mV
2) Overcurrent measurement range: 0-30A Minimum resolution: 10mA
3) Measuring range of internal resistance: 0-999mΩ Minimum resolution: 1mΩ
4) Measuring range of identification resistance: 0.1-999.9KΩ Minimum resolution: 0.1KΩ
5) Capacity measurement range: 100-10000mAH Minimum resolution 1mAH
The basic functions of the tester include:
1. Quick detection of battery static parameters (main function).
Type of measurable battery: lithium battery, nickel-hydrogen battery, nickel-cadmium battery, lead acid battery, lithium ferrite battery
1.1 Battery voltage detection (lithium battery that is already under protection can be automatically awakened)
1.2 Battery internal resistance test (1-999 mOhm)
1.3 Battery charging performance test
1.4 Battery dischargeable performance test
1.5 Battery over-current detection (only for batteries with protective plates, test the peak current of protective plates)
1.6 Battery short-circuit protection function test (only for lithium battery)
1.7 Detection of identification resistance 1 (or thermistor) inside the battery
1.8 Detection of identification resistance 2 (or thermistor) inside the battery
1.9 The upper limit and lower limit can be set respectively for the part above which the value can be detected for quick screening.
2. Battery capacity test.
3. Individually selectable battery charging function.
4. Battery discharge function that can be selected separately.
5. Intelligent voltage test function
6. Instrument calibration function